Changing the settings of an antenna is something that you would surely be able to do. However, you have to know the right flow so that this thing would really be able to serve its purpose. This can be helpful for your work and save you a lot of money since you shall not call a professional even for an advice.
You should not paint this item just for fun. A military CB antenna is meant to look professional since your superiors are bound to check it. Thus, stick with what your colleagues have done and you can even ask for their help if you are really having difficulty dealing with yours.
Do not tighten the set up that much. Yes, it is perfectly understandable that you are worried about the position of this thing but you can always have fasteners to complete the set up. That would prevent the base from cracking up and leading you to buy a new one. Also, use a torque wrench in this task for your safety.
Open the bottom part with the use of common tools. However, never use a knife since that can make the lid open more which can pave way to air. If you have a screwdriver, that shall be enough and the next thing that you need to focus on is the location of the main cable. Read the label for you not to have mistakes.
Twist the number five capacitor from the right of the cable. Everything you extract has a connection. If you cannot find any nub on what you are holding right now, you got the wrong line. So, do not be afraid to try again and do not stop until you have accomplished what your colleagues have done for themselves.
Have more than enough length for the cable which you shall be using. If your CB is a little bit far, you can make use of the allowance to finally make the connection. Also, be able to protect yourself by using the right gear. Do not touch any of the heated parts without the official materials for your safety.
Make sure that the cable is properly attached and that they shall be mounted properly. Also the whole set up has to be away from metallic materials. This can improve the reception and keep you from getting in trouble while you are in the battle field. Your safety has to be one of your primary concerns in doing this task.
Let a SWR meter be the judge of the progress which you have made. If you did not meet the work, you possess no choice but to retrace your steps. However, be aware of your exact mistake for you to get it right for the second time.
Close the cover once you pass the meter. Prevent the wires from being exposed by tightening the screws. You can even put a protective tape on the lid for you to have a smooth ride and get back to the people you love at home.
You should not paint this item just for fun. A military CB antenna is meant to look professional since your superiors are bound to check it. Thus, stick with what your colleagues have done and you can even ask for their help if you are really having difficulty dealing with yours.
Do not tighten the set up that much. Yes, it is perfectly understandable that you are worried about the position of this thing but you can always have fasteners to complete the set up. That would prevent the base from cracking up and leading you to buy a new one. Also, use a torque wrench in this task for your safety.
Open the bottom part with the use of common tools. However, never use a knife since that can make the lid open more which can pave way to air. If you have a screwdriver, that shall be enough and the next thing that you need to focus on is the location of the main cable. Read the label for you not to have mistakes.
Twist the number five capacitor from the right of the cable. Everything you extract has a connection. If you cannot find any nub on what you are holding right now, you got the wrong line. So, do not be afraid to try again and do not stop until you have accomplished what your colleagues have done for themselves.
Have more than enough length for the cable which you shall be using. If your CB is a little bit far, you can make use of the allowance to finally make the connection. Also, be able to protect yourself by using the right gear. Do not touch any of the heated parts without the official materials for your safety.
Make sure that the cable is properly attached and that they shall be mounted properly. Also the whole set up has to be away from metallic materials. This can improve the reception and keep you from getting in trouble while you are in the battle field. Your safety has to be one of your primary concerns in doing this task.
Let a SWR meter be the judge of the progress which you have made. If you did not meet the work, you possess no choice but to retrace your steps. However, be aware of your exact mistake for you to get it right for the second time.
Close the cover once you pass the meter. Prevent the wires from being exposed by tightening the screws. You can even put a protective tape on the lid for you to have a smooth ride and get back to the people you love at home.
About the Author:
You can visit www.hascall-denke.com for more helpful information about Modifying A Military CB Antenna.
Aucun commentaire:
Enregistrer un commentaire